Supply and Install Vehicle's Box Wrapping Sticker Artwork.
Vehicle model: Hino, Isuzu, Hicom, and Others. (Flat Surface Truck's Box only)
Vehicle Type: less than BDM5000KG (flat box less than 16ft x 7ft)
- Customize sticker wrapping with logo artwork on front portion of the vehicle's box.
- Customize sticker wrapping logo artwork on the left and right portion of the vehicle's box.
- Customize sticker wrapping with logo artwork on rear portion of the vehicle's box.
- Media Material: Outdoor Vehicle Vinyl Sticker (brand name: Avery MPI Value Flim).
- Quality Printed: Full Colours Printing With 1200 x 1200 dpi HD Quality Outdoor Printing.
- Print Head model: HP Latex 360
- Finishing: Double Layer Outdoor.
- Printed Ink: Original HP Latex Ink.
- Warranty: 1-year warranty on colour fade.
Truck's Box Graphic (L Full)
Care for your vehicle graphics like you would any fine paint finish. Using high quality Avery products designed specifically for car care and these cleaning and maintenance procedures will help keep your Avery vehicle graphics looking their best.
- Wash whenever the car appears dirty. Contaminants allowed to remain on the graphic may be more difficult to remove during cleaning.
- Rinse off as much dirt and grit as possible with a spray of water.
- See "Difficult Contaminants" on page 1, for spot cleaning bird droppings, tar, etc.
- Use a wet, non-abrasive detergent such as 3M™ Car Wash Soap 39000 or Meguiar’s NXT Generation® Car Wash or Deep Crystal® Car Wash and a soft, clean cloth or sponge.
- Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
IMPORTANT NOTE Avery does not recommend using wax or other similar coatings on vehicle graphics.
Vehicle Type: less than BDM5000KG (box less than 16ft x 7ft)